Do not worry. The whole process consists of very simple steps.
Clean the application surface. It is necessary for better adhesion.
2- Surface measurement
Measure the m2 of the surface you will apply. 1 package Setaplaster covers an average of 4.5 m2 area.
3- Product Preparation
Add 6 liters of warm water to a large bowl. (6 liters of water should be used for 1 pack of setaplaster)
4- Product Preparation
Then 1 pack of Setaplaster product unload.
5- Product Preparation
Mix by hand or mixer.
6- Product Preparation
Wait 30 minutes for the material to reach the appropriate consistency.
7 - Application
Apply the product to the wall with the help of a trowel.
8 - Application
With a fixed angle and speed, the product is spread equally everywhere.
9 - Drying
Make sure there is no problem with the application. then let it dry.
Details The Consider :
1 - 1 pack of Setaplaster should be used with 6 liters of water.
2 - Surface cleaning will ensure that your product adheres to the surface better.
3- While mixing, make sure that the water penetrates the Setaplaster completely.
4- An average of 30 minutes of mixing will be sufficient.